The upgrades owners actually buy and keep.

The Jeep Renegade was never meant to stay stock. Owners come to Jeeple MADNESS because they want a sharper throttle, more clearance, a usable hitch, a modern screen, and protection that survives real trails, not catalog filler.

This list is the short version of what we recommend first. Explore the matching products below, with photos, current catalog prices, and separate listings for engine and equipment variants. Check the product page for your year, engine, and trim before ordering.

In this guide
  1. The ten-upgrade shortlist
  2. 1. MADNESS Autoworks GOPedal Plus, throttle response you can feel
  3. 2. MAXBoost by MADNESS Autoworks, 1.3L and 1.4L turbo power
  4. 3. MADNESS Off Road Roof Rack Ladder
  5. 4. Upgraded head units, T2, T4, and Widescreen
  6. 5. Premium all weather floor liners
  7. 6. Daystar 1.5" Comfort Ride lift kit
  8. 7. Jeep Renegade retrofit trailer hitch
  9. 8. MAXFire ignition coils from MADNESS Autoworks for 1.3L, 1.4L, and 2.4L
  10. 9. Sprint Performance Air Filter and BMC Performance Air Filter
  11. 10. Valkyrie Off Road skid plates
  12. Choose your Renegade build
  13. Shop with Jeeple MADNESS

The ten-upgrade shortlist

  1. MADNESS Autoworks GOPedal Plus, throttle response you can feel
  2. MAXBoost by MADNESS Autoworks, 1.3L and 1.4L turbo power
  3. MADNESS Off Road Roof Rack Ladder
  4. Upgraded head units, T2, T4, and Widescreen
  5. Premium all weather floor liners
  6. Daystar 1.5" Comfort Ride lift kit
  7. Jeep Renegade retrofit trailer hitch
  8. MAXFire ignition coils from MADNESS Autoworks for 1.3L, 1.4L, and 2.4L
  9. Sprint Performance Air Filter and BMC Performance Air Filter
  10. Valkyrie Off Road skid plates

1. MADNESS Autoworks GOPedal Plus, throttle response you can feel

If you only do one performance upgrade on a Renegade, start here. Factory drive by wire throttle is intentionally soft. The GOPedal Plus reprograms pedal response so the truck answers when you ask, not a half second later.

It is plug and play, reversible, and controlled from a wireless remote or the GOPedal Plus smartphone app. Maps cover every mood: Eco, Street, and Race, each with five fine tune levels, plus Valet and Protect modes when you hand over the keys or want extra security.

Fitment: Dedicated versions for the 1.3L turbo, 1.4L turbo, and 2.4L. 30 day money back trial.

Kills the lag that makes merging and passing feel late. App and wireless remote, no digging under the dash to change maps. Pairs cleanly with MAXBoost, AutoFlash, and intake upgrades. Choose your engine-specific GOPedal Plus from the listings below.

2. MAXBoost by MADNESS Autoworks, 1.3L and 1.4L turbo power

Throttle response is half the story. MAXBoost is the engine control module that adds the power behind it. Designed by MADNESS Autoworks for the turbo Renegade, it optimizes boost and fueling for real world gains, up to around +30% power and torque depending on engine and conditions, with published figures on the 1.4L in the neighborhood of +25 PS and +58 Nm, plus a shot at better consumption when you stay out of Race.

Three driving modes with five levels each let you keep a civil daily map and a weekend map on the same module. The same app ecosystem that runs GOPedal Plus also talks to MAXBoost, so you can change throttle and boost from the phone instead of stacking random boxes.

Fitment: Specified for the 1.3L and 1.4L turbo engines. Confirm year and ECU at checkout or call us.

Plug and play hardware with multiple maps, not a one shot flash. Works with stock or supporting mods such as a filter, coils, and exhaust. Reversible. Your factory calibration stays intact.

Catalog update: MAXBoost for the Renegade is not listed in our current catalog. The MAXPower PRO modules below are alternatives for the 1.3L and 1.4L engines; they are separate products, and the MAXBoost specifications above do not describe them. Review the individual listings before choosing.

3. MADNESS Off Road Roof Rack Ladder

A roof rack is useless if you cannot get to it without standing on a plastic bumper. The MADNESS Off Road Roof Rack Ladder is built in Texas for the Renegade: 1 inch steel tube, textured black powder coat, 400 lb rating, driver side mount, no drilling. It bolts to vehicles with OEM roof rails and feels like a real ladder instead of a decorative stick.

Owners use it for rooftop tents, recovery boards, cargo boxes, and weekend gear. Install is typically a 20 to 30 minute driveway job with basic hand tools and color printed instructions.

Requires: Factory roof rails. Hardware included.

Made in Texas, USA. Rust resistant powder coat built for weather, not showrooms. Looks correct on Trailhawk and Latitude alike.

4. Upgraded head units, T2, T4, and Widescreen

The factory radio is the one interior complaint we hear more than any other. Jeeple MADNESS carries a full range of direct fit upgrade systems with install kits. Nothing else to hunt down.

Standard T2 The value workhorse. Wireless Apple CarPlay and Android Auto, steering wheel control integration, backup camera ready, door open indicators, and a complete install kit for 2015 to 2023 North American Renegades.

Standard T4 Steps up the internals: 8 core A55 processor, 4GB RAM + 64GB storage, IPS 1280x720 display, Wi Fi / 5G, Bluetooth 5.0, dual USB, DSP, and wireless CarPlay / Android Auto. Same complete kit and factory style integration.

Widescreen Design T2 and Widescreen Design T4 The units that change the cabin. Extra wide 12.3 inch 2.5D tempered QLED display at 1920x720, split screen apps, 4G/5G Wi Fi, steering wheel buttons retained. This is the screen people photograph. T4 Widescreen is the flagship spec. T2 Widescreen is the same visual jump at a lower price.

All kits include the harness and dash integration pieces. Designed for North American Renegade dash geometry. Shop T2, T4, Widescreen T2, and Widescreen T4 at Jeeple MADNESS.

5. Premium all weather floor liners

Mud, slush, trail sand, dog hair, grocery leaks. The Renegade’s carpet does not survive a real year without liners. Our premium all weather front and rear set is the version we recommend over cheap rubber mats.

These are 3D digitized to the Renegade footwells, not a “universal compact SUV” shape. A three layer build gives you a waterproof, easy clean surface, a shock and sound inner core, and a patented anti skid backing that stays put without chewing factory carpet. Raised edges hold spills instead of sending them under the seats.

Listing: Jeep Renegade Floor Liners, Premium, Front and Rear Set.

Custom fit, not trimmed to fit. Non toxic, odorless material that stays flexible in Texas heat and winter cold. Pair with a cargo tub liner if the rear is a work zone.

6. Daystar 1.5" Comfort Ride lift kit

A modest lift is the difference between a Renegade that looks stock and one that can wear a larger tire without rubbing through every driveway. Daystar’s Comfort Ride kit is a 1.5 inch, 100% bolt on system that does not require strut disassembly.

The kit uses progressive rate polyurethane coil spacers (front and rear), rear control arm brackets, and Daystar’s top load strut stud extenders. Ride quality stays close to factory. It is FMVSS 126 compliant and backed by Daystar’s Lifetime Go Everywhere Warranty.

Fitment: All Renegade models, 2WD and 4WD Sport, Latitude, Limited, and Trailhawk. Actual lift can vary slightly by trim. Supports up to two tire sizes larger on stock wheels.

Made in the USA. No metal to metal spacer noise. The first step before a more aggressive wheel and tire package.

7. Jeep Renegade retrofit trailer hitch

This is our kit. Not a hanging bar under the bumper. A factory style in bumper 2 inch receiver that keeps departure angle and ground clearance intact. Height is correct for trailers and bike racks. Jeep dealers buy this kit because it is complete.

You do not need an expensive pre cut bumper cover. The kit includes a Texas made custom receiver, bezel fascia, self adhesive cutting template and position checker, 10 replacement body clips, 14 mm factory style anchor bolts for non Trailhawk models, a trailer light converter with fuse holder and heat shrink, and a 12 page full color instruction manual.

Ratings: Do not exceed factory towing limits. Typical Renegade max is 2,000 lb towing / 200 lb tongue. Always confirm in the owner’s manual for your year and powertrain.

Fits any Renegade model and engine. Wiring is optional if you only need a bike rack or cargo carrier. View the Jeep Renegade retrofit kit below for current options and kit contents.

8. MAXFire ignition coils from MADNESS Autoworks for 1.3L, 1.4L, and 2.4L

Weak coils show up as a high RPM misfire, a stumble under load, and a truck that never feels as sharp as the tune you just installed. MAXFire coils are built for MADNESS Autoworks to exceed OEM spark energy, with a stronger pack and a lifetime warranty for as long as you own the vehicle.

They are a direct swap, a complete set of four, and they matter even more once you add MAXBoost, AutoFlash, or a freer flowing filter. Stock coils are a known weak point on these engines when you ask them to work harder.

Available for: 1.3L, 1.4L turbo, and 2.4L Renegade engines.

Higher voltage, cleaner combustion, fewer misfires. Lifetime warranty through MADNESS Autoworks. Recommended companion to any ECU or intake upgrade.

9. Sprint Performance Air Filter and BMC Performance Air Filter

More air is still the cheapest power you can buy, if the filter actually flows and still filters. We stock two names that beat oiled cotton and paper, and we sell both because owners argue about them and we refuse to pick a single religion.

Sprint Performance Air Filter Italian polyester media. Independent university testing put Sprint’s P08 tissue at the front of the pack for airflow versus leading cotton “race” filters. The P037 waterproof version filters down to 37 microns and was proven on the salt at Bonneville. Direct fit panels for 1.3L, 1.4L turbo, and 2.4L, including P08 F1 85 and S High Performance options on the 1.3L.

BMC Performance Air Filter Oiled cotton done properly. BMC’s layered media contains particles down to 7 microns (paper OEM is typically around 10) with less than half the pressure drop of a paper element and 98.5% efficiency against ISO 5011. A favorite drop in for the 2.4L and other Renegade applications we list.

Both are washable and serviceable, not disposable paper. Choose a Sprint Performance Air Filter when you want maximum flow and wet weather confidence. Choose a BMC Performance Air Filter when you want proven oiled cotton filtration at a sharp price.

10. Valkyrie Off Road skid plates

Plastic factory shields are for parking lot scrapes. Valkyrie builds steel armor for the Renegade and Compass: front engine skid, driveshaft / center bearing skid, rear differential coverage, and combo kits. Plates are laser cut 3/16 inch steel with a powder coat finish, approach and departure angles that slide instead of hook, and venting so you are not trapping heat against a Dana bearing.

The front plate is the one trail owners talk about. It covers the oil pan the factory piece leaves exposed, and service panels let you reach the drain and filter without dropping the whole skid every oil change. Fitment exists for Trailhawk and non Trailhawk architecture. Tell us the year and trim so we send the right plate.

Why Valkyrie: Thickness, coverage, and hardware that survive rocks. Compatible with typical 1.5 to 2 inch lifts.

3/16" steel, powder coated or raw for custom finish. Hardware included, bolt on install. The upgrade that keeps a lifted Renegade from becoming an oil pan story.

Catalog update: Valkyrie Off Road skid plates for the Renegade are not listed in our current catalog. Contact us to check sourcing and fitment for your year and trim.

Choose your Renegade build

Weekend driver: GOPedal Plus, premium liners, head unit. That is a different truck in a Saturday.

Daily plus light trails: Add the Daystar 1.5", MAXFire coils from MADNESS Autoworks, a Sprint Performance Air Filter or BMC Performance Air Filter, and the MADNESS Off Road Roof Rack Ladder if you already have rails.

Built Renegade: MAXBoost on the 1.3L or 1.4L, Valkyrie skids, retrofit hitch, then wheels and tires to match the lift. Call us before you stack boost, exhaust, and a tune so the maps match the hardware.

Shop with Jeeple MADNESS

Jeeple MADNESS brings together parts, accessories and upgrades for Jeep Renegade and other Jeep models. Explore the linked products above for current prices, options and fitment details.

If you are unsure about your year, engine or Trailhawk versus Latitude fitment, [contact our team](/contact) before ordering. Browse the [Jeep Renegade catalog](/jeep-renegade/start-shopping) for more options.

Products, prices and kit contents can change. Confirm the current listing before ordering and always follow factory towing, payload and tire clearance guidelines. Jeeple MADNESS is an independent store and is not affiliated with Stellantis, FCA, Jeep or their trademarks.